As you would know. If you follow me on one of these social medias, you would know that i will be tearing this down out of all of the series 6 smartwatches i own and we’re, going to see. What’S inside of these clones i’ve never done a series. 6, tear down smart watch so well the clone version. So here we are, we are trying it with this ia pro, but, as always, people make sure you subscribe and also hit the bell notification. So when i upload any video you’ll actually be notified and check out. My uh fake watches playlist, as you can see all of the previous uh smart watches, i’ve done. If you want to see unboxing and review of this, i will leave it in the link. I will leave the link in the description box below you can check out the video, but this is a decent clone. I’M, not gon na lie. I’Ll just show you quick uh what’s inside the box and then we’ll just tear this down. So you get a scrap. Well, a watch band and you also get some manuals and you get a wireless charging underneath the box. But out of all that, this is what you need to look at. This is a good clone. Don’T get me wrong. They come with a screen protector. You get it in four different colors. I opted for the blue one just to be a little bit different as you can see.
It’S the watch sixth generation 44 millimeter. It has the working crown and the cutout mic and the power button. Also, the watch bands – you can actually put them in with this button here and take them out as well, which is good, so it is a uh, a decent looking clone let’s just switch it on to see if there’s any battery, i don’t think there’s any battery. In it, no there’s no battery in it, but anyways. If you want to see a full unboxing and review check it out in the uh link in the description box below so with the uh we’re gon na get straight into it. To be honest, now with the fakes, you would know that they don’t actually um glue the watches on really good. You can tell with my teardown on the fake smartphones, but i don’t know where we’re going to go into this, so we’re going to it from the back or the front. I have no idea there’s only one way to find out we’re going to go into it with in from the front with a bit of force and everything um i’m actually trying to well i’ve, just actually got in a little gap into the front of the screen And this is where we are going, and so you don’t need any heat with these, because the glue that you use adhesive is not really good. It doesn’t stick down. So, even if you put a sharp object in it, it’ll just uh just bring it up.
To be honest, so i want to be a little bit careful so don’t uh snap, the wires or anything behind it. But here we go check this out. The interior of the ia pro look at that, so i want to see we’re going to take this off and here we have it. So luckily the battery is um dead. So you know we don’t uh won’t, get any shocks or anything like that. But, as you can see here we have some lego connectors uh, going on to the circuit board from the screen, which is good because it’s not soldered onto the screen uh. So let me just zoom in for you to show you what it is. We need to see what chipset they use as well. First of all is let’s see if we can take these lego connectors off, which is connecting the screen to the circuit board that’s one and that’s – to check this out and that’s that this is that was around it. But here is the screen. Look at that, so that is the ribbons and have got a bit of um some serial numbers ht, as you can see right here, there’s a lot of numbers on this one. It is the circuit board of the i8 pro, as you can see here now we have got a few well one screw phillips screw right there so i’m going to take that off and see if we can get out the circuit board screw out and as you Can see here, the circuit board is soldered on and to i’m, pretty sure that’s the vibrator motor right here the battery is underneath, but we can’t actually see what mah is really.
But if you take a closer look, you can actually see the chip just coming out right there, but we’re gon na see if we can get into into there because i’m pretty sure that’s actually soldered on over the circuit board – and here is the mic right here And the crown is actually on a separate uh little circuit board inside, but what i’m gon na do is we’re just gon na rip this off, because it’s not we’re not going to use it. You know i want to show you everything with that we have inside. So the battery has come out and the mah is 220, so there was right there that is 220 mah, and that is connected to the back where the charging um mechanism is right there, so that’s good, but yeah kind of battery now wouldn’t it right. So that of the the charging mechanism is also connected to that ribbon at the top right there. This one here – and that is connected to the back of the circuit board here – is the back as well. So the only thing that’s actually stopping me from taking this out is the charging mechanism which is connected to the back of the body, as you can see right there. So this is definitely a different kind of video, so what i’m gon na do is i’m, just gon na break it because i’m, not gon na, actually use this. Unless we can take it off.
No, we can’t, i can’t, take it off from there unless we rip that off that’s the coil for the wireless charger and there we have it. We finally got all the components out from the uh from the i8 pro as you can see right there. So this is a empty shell, just zoom it out, for you a bit all right. There we go so that is the empty shell and i don’t think you can get in it from the back it’s a good job if we went in from the front. So that is the body now, as you can see here, it’s got a few components: that’s. The wireless charging coil here is the vibrator motor and what is inside here. So this is just no plastic, a block of plastic uh. We need to see what kind of chip they’re using and so we’re gon na get a better look at that right now, look at that. It actually says we have a mediatek arm chip, it’s uh, i don’t know if you can actually see it properly with the i’m trying to zoom in so it’s mt 250. I would say two: five zero three av that’s, the chip that it is um and we have a giga device right here, h, j, two: zero, two zero. So definitely that is the chip but i’m to want to know what that is, but it don’t matter anyway. So that is the chip that they use inside of this ia, prom, pretty sure it’d be the same chips that they use in this rest of the series six clones, but here we have it.
That is the tear down of this i8 pro, as you can see right there. Let me know what you thought so in the comment section below the screen is intact, so what i’m going to do is on the next video i’m gon na see if this actually works on another cd6 clones. If you want to see that, let me know in the comment section below anyways, i hope you enjoyed this video if you want to see any other teardowns do.KXmkHyXXU28
